zxtp2013g da tasheet number: ds33714 rev. 3 - 2 1 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated 100v pnp medium power low saturation transistor in sot223 features ? b v ceo > - 1 0 0 v ? i c = - 5 a h igh continuous collector current ? i c m = - 10 a peak pulse current ? low s aturation v oltage v ce( sat ) < - 90 mv @ - 1 a ? r sat = 60 m for a l ow e quivalent on - resistance ? h fe s pecified u p to - 10a for a h igh g ain h old - u p ? lead - free finish; rohs compliant (notes 1 & 2) ? halogen and antimony free. green device (note 3) ? qualified to aec - q101 standards for high reliability application ? m otor d riving ? line s witching ? high s ide s witches ? subscriber l ine i nterface c ards (slic) mechanical data ? case: sot223 ? case m aterial: m olded p lastic. green m olding c ompound ; ul flammability rating 94v - 0 ? moisture sens itivity: level 1 per j - std - 020 ? terminals: finish - matte tin plated lead s; solderable per mil - std - 202, method 208 ? weight: 0.112 grams ( a pproximate) ordering information (note 4 ) product compliance marking reel size (inches) tape width (mm) quantity per reel zxtp2013gta aec - q101 zxtp2013 7 12 1,000 note s: 1 . eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4 . for packaging details, go to our website at http//www.diodes.com/products/packages.html . marking information sot223 sot223 top view device symbol top view pin - out zxtp 2013g = product type marking code yww = date code marking y or y = last d igit of y ear (ex: 5= 2015) ww or ww = week c ode (01~53) zxtp 2013g green c e b yww
zxtp2013g da tasheet number: ds33714 rev. 3 - 2 2 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated absolute maximum ratings (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit collector - base voltage v cbo - 1 4 0 v collector - emitter voltage v ceo - 1 0 0 v emitter - base voltage v ebo - 7 v continuous collector current i c - 5 a peak pulse current i cm - 1 0 a thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value unit power dissipation (note 5 ) linear d erating f actor p d 3 .0 24 w mw/c power dissipation (note 6 ) linear d erating f actor p d 1.6 1 2.8 w mw/c ? ja 42 c /w ? ja 78 c /w ? j l 10.48 c /w ? j c 13.8 c /w ? j, t stg - 5 5 to + 150 c esd ratings (note 9 ) characteristic symbol value unit jedec class electrostatic discharge - human body model esd hbm 4 ,000 v 3 a electrostatic discharge - machine model esd mm 400 v c notes: 5 . for a device mounted with the collector lead on 52mm x 52 mm 2oz copper that is on a single - sided 1.6mm fr4 pcb ; device is measured under still air conditions whilst operating in steady - state. 6 . same as note 5, except the device is mounted on 25 mm x 25 mm 1 oz copper . 7. thermal resistance from junction to solder - point (at the end of the collector lead). 8. thermal resistance from junction to top of the case. 9. refer to jedec specification jesd22 - a114 and jesd22 - a115.
zxtp2013g da tasheet number: ds33714 rev. 3 - 2 3 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated thermal characteristics and derating information 100m 1 10 100 10m 100m 1 10 single pulse. t amb =25c 52mmx52mm single sided 2oz cu v ce(sat) limit 100s 1ms 10ms 100ms 1s dc safe operating area -i c collector current (a) -v ce collector-emitter voltage (v) 0 20 40 60 80 100 120 140 160 0.0 0.5 1.0 1.5 2.0 2.5 3.0 25mmx25mm single sided 1oz cu 52mmx52mm single sided 2oz cu derating curve temperature (c) max power dissipation (w) 100 1m 10m 100m 1 10 100 1k 0 10 20 30 40 52mmx52mm single sided 2oz cu transient thermal impedance d=0.5 d=0.2 d=0.1 single pulse d=0.05 thermal resistance (c/w) pulse width (s) 100 1m 10m 100m 1 10 100 1k 1 10 100 single pulse. t amb =25c 52mmx52mm single sided 2oz cu pulse power dissipation pulse width (s) max power dissipation (w)
zxtp2013g da tasheet number: ds33714 rev. 3 - 2 4 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated e lectrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition collector - base breakdown voltage b v cbo - 1 4 0 - 16 0 c = - 100 a collector - emitter breakdown voltage (note 10 ) b v ce r - 1 4 0 - 16 0 c = - 1 a , r b 1k? collector - emitter breakdown voltage (note 10 ) b v ce o - 100 - 115 c = - 1 m a emitter - base breakdown voltage b v ebo - 7 - 8.1 e = - 10 0a collector cut - o ff current i cbo < 1 - 20 - 500 na na v cb = - 1 0 0 v v cb = - 100 v , t a = + 100 c collector cut - o ff current i cer r 1k? < 1 - 20 - 500 na na v cb = - 1 0 0 v v cb = - 1 0 0 v , t a = + 100 c emitter cut - o ff current i ebo eb = - 6 v dc c urrent t ransfer static r atio (note 10 ) h fe 100 2 50 c = - 10ma, v ce = - 1 v 100 200 300 i c = - 1a, v ce = - 1 v 25 50 c = - 3a, v ce = - 1 v 15 30 c = - 4a, v ce = - 1 v c = - 10a, v ce = - 1 v collector - emitter saturation voltage (note 10 ) v ce( sat ) - 20 - 30 m v i c = - 100m a, i b = - 10ma - 70 - 90 i c = - 1a , i b = - 100ma - 120 - 150 i c = - 2 a, i b = - 200m a - 240 - 340 i c = - 4 a, i b = - 400m a base - emitter saturation voltage (note 10 ) v be( sat ) c = - 4 a, i b = - 400m a base - emitter turn - o n voltage (note 10 ) v be( on ) c = - 4 a, v ce = - 1v transitional fr e quency (note 10 ) f t c = - 100m a, v ce = - 10v, f = 50mhz output c apacitance c obo c b = - 10 v , f = 1mhz switching time t on c c = - 5 0 v , i c = - 1 a, i b1 = - i b2 = - 100ma t off note: 10 . measured under pulsed conditions. pulse width 300s. duty cycle 2%.
zxtp2013g da tasheet number: ds33714 rev. 3 - 2 5 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated typical electrical characteristics (@ t a = +25c, unless otherwise specified.) 1m 10m 100m 1 10 10m 100m 1 1m 10m 100m 1 10 0.0 0.1 0.2 0.3 0.4 0.5 0.6 1m 10m 100m 1 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 1m 10m 100m 1 10 0.4 0.6 0.8 1.0 1.2 1.4 0 50 100 150 200 250 v ce(sat) v i c tamb=25c i c /i b =50 i c /i b =20 i c /i b =10 - v ce(sat) (v) - i c collector current (a) v be(sat) v i c i c /i b =10 100c 25c -55c - v ce(sat) (v) - i c collector current (a) h fe v i c v ce =2v -55c 25c 100c normalised gain - i c collector current (a) 25c v ce(sat) v i c i c /i b =10 100c -55c - v be(sat) (v) - i c collector current (a) v be(on) v i c v ce =2v 100c 25c -55c - v be(on) (v) - i c collector current (a) typical gain (h fe )
zxtp2013g da tasheet number: ds33714 rev. 3 - 2 6 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated package outline dimensions please see ap02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. for high voltage applications, the appropriate industry sector guidelines should be considered with regards to creepage and c learance distances between device t erminals and pcb tracking. sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e - - 4.60 e1 - - 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) c 2.30 c1 6.40 x 1.20 x1 3.30 y 1.60 y1 1.60 y2 8.00 a1 a 7 7 d b e e1 b1 c e1 l 0-10 q e 0.25 seating plane gauge plane x1 y1 y x c c1 y2
zxtp2013g da tasheet number: ds33714 rev. 3 - 2 7 of 7 www.diodes.com may 2015 ? diodes incorporated zxtp2013g a product line of diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of t his document or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthor ized sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application , customers shall indemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or fore ign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical components in life support devices or systems witho ut the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices o r systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect it s safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related requirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 5 , diodes incorporated www.diodes.com
|
